Hi Andrew
Under Drive Train I dont have RA= and DEC= but instead I have AZ= and ALT=
When I go into these,the values are
AZ/RA Train = 61
ALT/DEC Train=10
Thank you
Quote:
Originally Posted by AndrewJ
Gday Niv
Yep, thats good and its the best firmware for what you are doing
If BINTEL loaded the patched firmware, you should now have 4 entries under drive train. The last 2 will be something like RA= and DEC=
Hitting enter on these will allow you to read/edit the drive train values direct from the Hbx.
Other that that, you can use my PEC editor to read a lot more of the data out via a PC connection.
http://members.optusnet.com.au/johansea/ ( grab the beta copy at the bottom )
The 10% lash may be too low, but we need to know what the drive train numbers are as well, as the two work in conjunction.
The drive train is done first to define the magnitude of the lash.
The percentages are then tweaked to improve the "responsiveness" of reversals.
A1F7 is actually Meades firmware, but third party patches are then applied to fix a lot of the known bugs. I am the "name" who did the patches for the Audiostars  )
Andrew |