|
Ok, I'll bite and put in my two cents
Asi,
Since you've gone to the trouble of resampling to such a large format, have you tried Birds technique? That is:
1) save the stacked result as 3 FITS files
2) fix them with Birds fixfits utility
3) read them into Astra Image or MaximDL
4) perform deconvolution, highpass filter etc operations
5) RGB combine (they are aligned already by Registax)
6) perform color balance and saturation operations
7) Unsharp masking
When you do this make sure you have NOT used the wavelets in Registax (all ones). By the way, there is a lot of good data in your image and it looks very promising. Assuming you have a good noise sample outside the planet face, the deconvolution should give you a much less noisy result.
If you dont want to do this, and use wavelets, it seems to me at this scale the lower (finer) scale adusters should be minimized, and the larger ones should be manipulated, or the reverse of what you posted. Using wavelets at this scale is tricky as it requires possibly changing the default Registax settings, and then you have so many combinations that it will drive you nuts (at least it did me).
Glenn J.
|