Quote:
|
Originally Posted by RAJAH235
Hi Eric. It runs off 12 volts which plugs into the socket, (with small red LED), at the right. The switches control the heater & whether in constant or flash mode. The pot on the other side controls the flash rate, which is variable from ~1 sec on/1 sec off, to 1 sec on/4 sec off. I do not touch the original on/off dimmer switch.
HTH.  L. |
OK.... why do you want it to flash? Seems to me like it would be annoying when you used it.
In reply to the original post.... My Telrad is probably the best scope accessory that I have ever bought. Well..... now that I have a pair of binoviewers, I'll have to say it was the second best accessory.