Hi Dave!
Regarding the engine, if possible, remove the spark plugs and give a good 5 second spray of WD-40 or similar into the cylinder. This will help stop corrosion in the cylinder and piston rings. Before you restart the motor after 6 months....
Check the engine coolant level.
Check the engine oil level and take note of the oil's colour, if any water or contaminates are present. If you are unsure, change the oil and oil filter before you start the engine.
Check and clean the spark plugs. With the spark plugs removed, turn the engine over for a few seconds. Replace the spark plugs and start the engine.
Next, check the brake fluid, power steering fluid, tyre pressures, lights, etc.
Refer to you owners handbook for more info.
Cheers!
|