|
Just a copy of my recent posts on Cn Binoviewers Section:
The desired result is for me to be able to use the Denk II binoviewers with the Baader Cool Ceramic 2" Herschel Prism attached to my FS60CSV/FC76D Hybrid scope.
Currently I have the Denk II Super System (Pwr Switch + OCS and also the Filter switch)
I also have the Baader Cool Ceramic Hercshel Prism.
The scope is the FS60 Focuser with the 105mm CSV tube attached to the FC76 Objective unit. Currently I am using the Baader ClickLock 2" eyepiece holder. This combination allows me to reach focus easily with 20mm to spare.
1. Adding binos obviously makes focus impossible with the current setup.
2. Using an OCS between the OTA and the Herschel Prism is NOT an option,
3. Without the OCS the Power Switch is not useable
I assume that the only option is to shorten the connections to the Prism and between the prism and OTA and maybe even cut up the spare OTA I have to make a Super Short tube.
Any other suggestions greatly appreciated.
|