|
I reckon so, and the other adapter I would need to put it on my SCT was next to it on the page. $55 between the two of them.
I had a look tonight and the barrel of my celestron e-lux 2" ep's screws straight on in place of the SCT thread nose. So that is one problem solved.
Next is a focuser, I think that the feather touch needs a closer look, it should clear the corner of the diagonal but if it is any taller than the stock focus knob the ep barrel will foul it, have to look and think if I would ever rotate it that far, though the refractor diagonal setup is likely to increase clearance there by a few mm.
|