|
It would go close to fitting, the curvature of the adapter plate might be a bit out, but you could take up the difference using washers between the adapter plate and the scope body; or have one of the adapter plates machined to suit the OD of your scope.
Installation is simple, four screws secure it to the scope, but you will need to re-collimate.
I am selling because it is excess to my needs, I was going to build a dob, but now I'm not! It presents virtually as new.
Last edited by Greenswale; 08-03-2014 at 07:41 AM.
Reason: Added info
|