Allview and Merlin Mount Bluetooth Setup
( 1 ) You need to Assemble and level your tripod making sure you secure all locking bolts.
( 2 ) Attach the mount to the Tripod as per the instruction manual.
( 3 ) Make ready power in form of batteries to power the mount.
( 4 ) Attach the Skywatcher Allview or SkywatcherMerlin/Orion Teletrack Bluetooth to the port on the mount where you normally put the hand controller wire to the mount where it says HC...
( 5 ) Turn the mount's power switch on.
( 7 ) setup and pair your new Bluetooth adaptor to your pc's Bluetooth using the code 1234
( 7 ) Download and install PapyWizard on your Pc.
( 8 ) Start the PapyWizard program up and go to the hardware tab then down the bottom to the plugins tab,click on that,it will bring a separate box up called plugins drivers and communication.
On the plugins yaw,pitch,shutter should all be Merlin - Orion and the tab opposite that should be All Bluetooth for yaw,pitch,shutter.
Now click on the drivers tab then click on choose and select your Bluetooth from the Bluetooth chooser with the drop down arrow,your device will be papy-Merlin then click okay and okay again on the plugins box.Now click on the hardware tab,click on connect and at the bottom of the PapyWizard box programme you will see a brief connection started and it will disappear and now your 4 direction keys will be highlighted with a blue colour, press a direction key to test.
Your done!
Enjoy
