|
Hi Greg,
I had the same issue on my Win7 64 bit computer, but I eventually solved it. Firstly, be sure to read the help file on the CD that came with the camera. There are very specific instructions on how to uninstall the driver. It isn't quite enough to uninstall the driver from the device manager! Without looking it up I won't get it quite right but you need to run the command function and then paste in some specific instruction, then scroll down the list until you find the driver, the run a command to uninstall it. I think if you do this, then reinstall the driver, you will be home free. You need to get to the stage where when you plug in the camera the computer gives up and won't automatically install the driver. Then you can reinstall and should have success. Also, just be positive you don't have a bum cable. I did and I wasted hours!!!
Mine is running great in CCDSoft using ASCOM. Is there a better way to run it in CCDSoft? It also seems to run fine with the X2 driver in TSX.
Peter
|