View Single Post
  #173  
Old 28-12-2013, 11:07 AM
Astroman's Avatar
Astroman (Andrew Wall)
<><><><>

Astroman is offline
 
Join Date: Feb 2005
Location: Paralowie, South Australia
Posts: 4,367
Quote:
Originally Posted by wasyoungonce View Post
Bam, I have a sealed DS18B20 sensor for you.

I was going to make them up to the 3pin DIN but if you want I can just send so you it to wire thru the motor DB9 and place as you wish. Or I can just give you a std non insulated DS18B20.

I have your PCBs all but made, just waiting for the gray encoder, DIN PCB sockets and few other small things.

I spoke you you about DC jack, aka you requested 2.1mm but I have not yet put that on so you can change your mind still!

Powering all devices is a real pain, I made a small distribution DC/USB hub so I can power multiple devices (and DSLR with +8V) and have a 4 port USB hub all in one. Things like this are invaluable to users and many users make their own.

Like that board, was it your own design or a bunch of commercial bits thrown together?
Reply With Quote