Quote:
Originally Posted by Paul Haese
Also your assumptions were right. I did not want to display the last part of the ip address or my static ip either.
I have noted that the port forwarding will not allow the standard port of 80 to be used as it says this is in use already. Yet both IP units are using this standard port because I cannot get those to work with any other port setting in IP edit.
|
Hi Paul,
Keep in mind that the address 192.168.0.0 through to 192.168.255.255 are reserved
special addresses on the Internet so that you, me, anyone can create their
own private intranets.
So you won't be giving anything away if you tell me what your intenal IP
addresses are.
You will also not be able to access your site externally from a
http://192.168.0.1:80
request either.
You need to know the IP address your service provider provides you and use that
address.
Best Regards
Gary