Quote:
Originally Posted by stevous67
Hmmmm, things can always be a little different for others, but without doubt you need more current for the STXL on cool down than the MHP can provide, especially in the warmer months. Once at temperature, it requires little to maintain temperature.
I've use a relay controlled by the MHP power switch to provide direct power to the camera. It has been totally reliable since.
Good luck Paul.
Steve
|
Last night I did a remote Tpoint run and I did not get the same problem. Although I did get an SBIG receive image error occasionally. So it seems the MHP was the cause of the malfunction. Are you using one of the switches in the software to provide more direct power? I was using the permanent power.