|
OK, now I am with you, you may have to experiment with the settings, the trick is going to be getting the serial cable to talk to the Autostar Controller through CCDSoft while it is Autoguider Mode, I have never tried that in the years I have used an ST-4. If you do get it to connect you may have to muck around with the type of guiding commands as well, either simultaneous or sequential. I have never heard of anyone doing it this way but there is always a first. I am going out to my scope tonight, I will have a look at the options in CCDSoft to try that. I will be interested in knowing if it works or not. I will stay open minded on this.
Have fun
JohnG
|