View Single Post
  #10  
Old 02-12-2013, 11:33 AM
AstralTraveller's Avatar
AstralTraveller (David)
Registered User

AstralTraveller is offline
 
Join Date: Mar 2008
Location: Wollongong
Posts: 3,822
Quote:
Originally Posted by Stardrifter_WA View Post
Yes, they are big and heavy. Although they are transportable, in pieces, putting it back together on your own is problematic, unless you have a couple of extra arms. It is hard to hold everything in place when putting the secondary mirror section onto the truss. I found this out recently when I had to take it off in order to fit a light shroud. I did manage it, but it was difficult.
That hasn't been my experience at all. I assemble and disassemble mine on my own and have no problems. You need the right technique but it's not hard at all. Basically, I leave the truss sections a bit lose at the base. Then I support the cage on two of the trusses while getting the bolt of the third one into the cage. Then I work around and get the second and third bolts in. Finally, everything is tightened down.
Reply With Quote