Quote:
Originally Posted by Satchmo
A little off topic : From memory a single ring support at 55% or something works almost as good as an 18 point on a 2" X 20" , due to the ability to re focus out the slight overcorrection resulted from the sag on either side of the ring ( which reduces the error by a factor of 4 ) . My 14" X 1.5" is mounted like this - with a solid ring of velcro tabs on plate and mirror - no clips or slings - works a treat for many years
|
My 10" uses velcro strips on a 6 point design. Works extremely well, no detectable strain on the mirror at all and it holds collimation forever. Bought a box of 25mm wide, 10 meters long I think from Bunnings. Has other uses as well, cable retention up the pier eg.
Very useful stuff ..
