[rob288 (Robert)]

Hi Terry,

Thanks for the help, we have it working, its an odd sequence to get going but it works and that's what counts.

The sequence is:

1. Start Digital Dome Works


2. Close Skyx Pro


3. Open Poth Ascom


4. Skyx Pro - Set telescope to home position


5. Poth - connect telescope


6. DDW Config
a. Click Slave
b. Click Ascom setup
c. Should be on Poth
d. Click ok and exit



7. Telescope will communicate to DDW . AAG working as well. So again many thanks.

Regards


Robert