|
Ok, I checked my OTA balance and all is fine there. So it must be something else.
I did a guider calibration in Maxim DL and noticed that I am not getting an L shaped pattern. Have a look at my poor mspaint drawing to see my broken L shape.
Any idea on what causes this?
Also, I ran Pempro last night and it would appear that I have 25 arc second peak to peak with PEC off and after creating a curve and sending it to the mount, turning EQMOD PEC gain to 1x, I had no difference. Even after inverting the curve, there was no change in my peak to peak, at one point it got worse. I'll have another play tonight with it, but this doesn't make sense why.
|