Quote:
Originally Posted by JB80
Hey all,
Due to what I can only describe as my own shoddy workmanship I have a lot of epoxy on the tiles of my grinding tool.
I've read it should just grind off but it is quite a mess and not just a little bit, nearly every tile has a bit on it and some are worse than others.
Do you think I would be better off trying to sand some of it back or just jump straight into hogging out?
|
Jump straight in and start
hogging. Dont know what size your tool and mirror are
. If large, like 12" to 16" plus your most likely starting with a #40 or #60 grit so would only take a few minutes to clear the epoxy. If the grooves between the tiles are full of epoxy, use a hacksaw
or hacksaw blade to remove excess of the offending substance before beginning hogging.
All the best.