Quote:
Originally Posted by redbeard
Hi Stefan,
I have just had a look at my autostar cable, (I have the etx 125pe), and it has a RJ45 at each end, same plug as a network lead but different pinout. the pins are all reversed ie: 1 to 8, 2 to 7......
If your cable is the same and if you or a friend have one of those RJ45 crimp tools, you can chop off one end of a network cable and place the wires in reverse order, crimp it and you have a cable, long as you like. By the way, not to be confused with a cross over cable as these only reverse the pairs and not the whole cable, although, if the end was chopped off it would be fine to use.
If not, let me know and I can ask the network boys at work to make one up and I'll send it to you. No cost.
Cheers,
Damien.
|
Hi Damien,
Thank you, I appreciate that!
Stefan.