|
Make sure you have the correct image scale and north position angle.
When you enter the image scale it has to be for the binning you are using. So if you are using 3x3 binning you multiply your arc sec/pixel x 3.
As mentioned you should grab the image scale and north angle off the image link test you do and enter it into the dialogue box when you start an automated run.
I just did one last week. I used 10 second exposures and 3x3 binning.
Image has to be automatically saved before it will work also. That is a check box as well.
Detection threshold you can play with but I have had the same experience and as I recall I did not have the auto save checkbox ticked and that was the bug. Or I had the wrong image scale/north position angle.
Greg.
|