|
Hello Cathy & Steffen,
That's an interesting observation on the video of the AZEQ6GT. It could be just the flange that makes the pulley look like its running out of true. But really bad if that's not the case !
The concentricity of the pulleys is obviously very important. The small pulley concentricity is is probably more important than that of the larger pulley. Errors from the small pulley will be faster and more difficult to guide out.
We machine the outer diameter, cut the pulley teeth and drill & ream the mounting diameter in one go on the our cnc machine. This method is much more accurate than buying in a stock pulley and then machining it to suit.
We will be looking in to making an similar kit for the EQ6, but will concentrate on the HEQ5 for now.
The EQ6 belt mod requires more work fitting it to the mount and we need to look carefully at making the kit as easy as possible to install.
Thanks, Dave.
|