Thread: Deep Helix
View Single Post
  #1  
Old 21-08-2013, 06:24 PM
John Hothersall's Avatar
John Hothersall
Registered User

John Hothersall is offline
 
Join Date: Apr 2007
Location: Thornlands, Brisbane.
Posts: 1,346
Deep Helix

SPX350 F4.5, ST10XME, Astrodon filters Ha5nm OIII 3nm.

Thought I would see what a deeper pixel well would do compared to the 314L+ and it sure brings out the fainter stuff with less noise. With 10min subs the black levels read 95 with the auto stretch in CCDSoft much lower than the 200+ with the 314. The outer material shows very well and the OIII rays are strong.

Had many difficulties with egg stars, loosened my EQ6 RA mesh and autoguiding improved, continual bad seeing, occasional secondary misting and sometimes egg stars in the corner with the heavy ST10 not sitting square when focuser screws tightened.

Ha-4hrs
OIII-6hrs all in 10min subs.

Colour:
Ha-red
OIII-blue
Ha25%OIII75%-green.

1st image Ha used as luminance
2nd image show detail
3rd image used OIII as luminance
4th image OIII lum image over processed and reduced for better emphasis.

Thanks for looking, John.
Attached Thumbnails
Click for full-size image (Ha RsGB2-25pc ha-cs3 finalx.jpg)
191.1 KB177 views
Click for full-size image (detail.jpg)
101.4 KB136 views
Click for full-size image (O3 Ha RGB1-cs3 finalx.jpg)
191.2 KB134 views
Click for full-size image (O3 emphasis over processed.jpg)
192.9 KB147 views
Reply With Quote