This camera has had minimal use - maybe a dozen nights ,if that. I've never really returned to astroimaging like I'd hoped I would, so it has to go. This camera is basically new.
1 x Cooled QHY9 8.3Mp Mono Camera
1 x QHY 5-position 2" Filter Wheel (with specially blacked out electronics casing so as not to annoy your neighbours on the field when filters change).
1 x set of QHY LRGB filters (mounted)
1 x power supply, TEC controller and cables
$1,500 posted to anywhere in Australia
$1,650 including 2" Baader 7nm Hydrogen Alpha filter (mounted) posted to anywhere in Australia
Thanks for looking
An image from this camera (didn't get time to take any really):
http://www.iceinspace.com.au/forum/a...se.php?a=78712
Specifications
Total pixels: 3448 x 2574 (8.9mega pixel)
Active pixels: 3326 x 2504 (8.3mega pixel)
Pixel Size: 5.4um x 5.4um
FullWell: 25.5Ke-
Imager Size : 17.96mm H x 13.52mm V 4/3inch
Readout noise: -8e @1Mpixel/s
Preview Speed: 3Mpixel/s (3 sec Download time)
Download Speed: 1Mpixel/s (9 sec Download time)
Peak QE: 56% @540nm 48%@Ha
Microlensing on chip
ABG: 1000X
16bit ADC with CDS and Preamp
USB2.0 High Speed interface
Built in 32 MBytes SDRAM buffer
Supports Binning: 1 x 1, 2 x 2, 3 x 3, 4 x 4
Communication port for QHY Color Filter wheel
Improved 2-Stage TEC cooling -50 Deg C Delta (Ambient)
Improved Heat Sink specifically for the KODAK CCD
Built in Temp sensor and 16bit high precision ADC
DC201 TEC Controller & DC adapter, Regulated
Built in Mechanical shutter
Seperately sealed CCD Chamber
Weight: 510g