Quote:
Originally Posted by coldknights
Hi Bojan did you finish this mod ?
If so how did it go ?
|
Yes, it was done almost 3 years ago, and it works without problems.
http://www.iceinspace.com.au/forum/s...6+modification
In the meantime I replaced the 200s/rev motors and home-made 1/4 gearbox (shown in that thread) with new high-torque steppers (
400s/rev)
The driving electronics is based on
Pololu stepper motor drivers (mounted on PCB), and SoundStepper application for windows, coupled with CdC and/or EQAlign software.
The thread discussing the software and new hardware is below:
http://www.iceinspace.com.au/forum/s...stepper+driver