|
I would recommend the RGB led strip with the 44 button remote controller.
I've used this before, it comes in a 5mt roll.
You can get it from eBay for about $35 inc postage from Sydney...not Hong Kong.
That way if you have any issues, you can contact someone who speaks English.
I would go for the SMD 5050 as a minimum (large diodes and very bright).
With the controller, you can dim or brighten it, change colour to whatever blue you like or yellow or pink. You can store upto 6 different custom colours.
You can choose different modes of light and make it flash, change colour or pulse. Options are a plenty.
There are 4 wires to solder though, just use 4 core security cable from bunnings, it's about $0.30 per metre and you'd only need a maximum of 5 metres depending in where your power source is.
Just make sure if you cut the strip, you dab a small bit of silicone on the bare end, otherwise you will have exposed live ends. It's only 12v so it would tickle more than anything.
Anyway, I think RGB is the way too go.
|