|
FWIW, i experienced this error several times between 2011 and 2013 while running an EQ6 with EQMOD and SkyX. I was never able to track it down successfully, but it has been around for at least that long. I no longer have the EQ6.
The only work-around i developed was to disconnect SkyX from EQMOD (EQ5/6 setting) after the scope had slewed to the object of interest, and then commence imaging without SkyX in the loop. Once the imaging process was done, i had to conenct Skyx again to slew to the next target. Not the best, but it limited the opportunity for the bug to appear and cause more dramas!
|