Tuning up the CG-5 Mount

[lepton3]

Time to give the CG-5 mount a proper tune up. I've got a set of replacement teflon bearings and some ultralube grease.

Here's the mount in bits, just wiped the grease off.

-Ivan

[lepton3]

Work continues while the thunderstorms rage outside.

Bearing surfaces smoothed with 600 grit wet & dry, then polished with metal polish.

Did this to all surfaces that come into contact with each other.

-Ivan

[brian nordstrom]

;) Ahh! the memories Ivan , you will be impresses with the finished mount , I did the same to my ( now sold ) EQ5 years ago and what a differance this makes . :D.
Brian.