Aluminium tape

[multiweb]

I'm after some alu tape to shim a couple of lenses that are not quite square to the sensor. Do you know where I can get this? TIA.

[Terry B]

The simplest shims to use are feeler guages. Go to supercheap and buy a set of feeler guages for less than $10. These are made of stainless though and won't bend very easily.

[multiweb]

Thanks Terry. I was thinking of something adhesive and more permanent that I can stick at the back of each lens.

[niko]

I got a roll of aluminium tape for my cooler box from Bunnings - 50mm wide (or thereabouts).

[gbeal]

If the local Bunnings idea doesn't pan out, I am sure I can lay my hands on some of the "500mph" stuff. Or the other fly-boys here could, Flasher or the likes.
Sing out if you need it.
Gary

[MrB]

Jaycar has it too, tho I'm sure it is cheaper elsewhere

[multiweb]

Thanks guys - will try bunnings and Jaycar first then. Thanks Gary too. Will keep that in mind :thumbsup:

[Marke]

If your over my way Marc I think I have a bit left over from building the Obs
was used to seal and join the insulation.

[gregbradley]

Sarking tape is aluminium tape with a fabric in it and is self adhesive. Its about .7mm thick.

In the roof sarking area in Bunnings. Not all Bunnings stock it though. Try a bigger Bunnings.

Greg.

[multiweb]

Thanks guys. Mark kindly offered some spare and I get a guided tour of his obs to boot. :thumbsup: