adman
11-06-2010, 10:12 AM
I have just received a TTL232R cable from Dontronics and have connected it to an RJ45 plug according to the directions on the EQMOD website:
RJ45 Pin 4 (BLUE) ------------> TTL232R Black wire
RJ45 Pin 5 (BLUE/WHITE) ----> TTL232R Yellow wire
RJ45 Pin 6 (ORANGE) ---------> TTL232R Orange wire
From what I understand, this will allow me to bypass the synscan handset and connect the RJ45 plug into the handset socket on the motor controller box.
Can someone who has done this before please confirm that the connections above are OK?
Also another important point crossed my mind...are the handset connections to the motor control box for the EQ5 the same as for the HEQ5. I can't see any reason that they would not be, but that is the sort of assumption that fries things....:P
The EQMOD site only gives details for the HEQ5, so I thought I had better ask....
Many thanks
Adam
RJ45 Pin 4 (BLUE) ------------> TTL232R Black wire
RJ45 Pin 5 (BLUE/WHITE) ----> TTL232R Yellow wire
RJ45 Pin 6 (ORANGE) ---------> TTL232R Orange wire
From what I understand, this will allow me to bypass the synscan handset and connect the RJ45 plug into the handset socket on the motor controller box.
Can someone who has done this before please confirm that the connections above are OK?
Also another important point crossed my mind...are the handset connections to the motor control box for the EQ5 the same as for the HEQ5. I can't see any reason that they would not be, but that is the sort of assumption that fries things....:P
The EQMOD site only gives details for the HEQ5, so I thought I had better ask....
Many thanks
Adam