NGC3576 in LRGB

[Bolts_Tweed]

What the heck - here is the fruits of last night. More colour than the nb but there is reduction in detail as well. I am really trying for detail more than faint neb so I will keep playing. Dynamic range was a bit of a pain as well.

Lum - I put 2 lums on it - the first was a Ha (420) + Red (60) blend at 70% opacity followed by a straight Ha (420) at 100% - was happy with no salmon colouring
Red - Ha (420) + Red (60) blend
Green (60)
Blue - OIII(60) + Blue (60) blend

So this is the result so far but I hope to extract more detail as I have a play at home next week.

Astrophysics 130EDT, SBIG ST8300, Astronomik 6 nm nb filters and Astrodon E series LRGB filters

Mark Bolton

[telemarker]

Looking very good indeed. Great detail but my tastes run to the narrowband version. As you said more subtle colours, but here you've maintained the loop details beautifully. :thumbsup:

[desler]

Mark,

The detail really seems to be in there, I look forward to seeing the progress.

Darren

[renormalised]

There's plenty of detail there, Mark. And, the colours are good too.

Remember, you're only working with a 130mm scope. They only gather so much light!!:)

Plus, you're not using an 80MP camera...only 8.3MP :)

You have to be careful in extracting details from a piccie...you can overdo it and degrade your piccie. It's really a happy medium between detail and "curb appeal" that you should aim for:)

[Bolts_Tweed]

Thx for the comments guys

Yeah - the scope limitations hit me in the forehead often but to get this with a 5 inch astounds me actually.

This only has a quick and nasty Multi Layer Deconcolution blend done it. I dont have CCDSharp lout here so the additional work is really only repeating what has been done. At home on hte calibrated monitor with better deconvolution alghorithms - I am pretty sure I can get more out of it without over-processing it.

Thx again guys.

Mark