View Full Version here: : NGC3576 Ha widefield
multiweb
30-04-2010, 12:16 PM
Last night was great. Heavy moon but no wind and relatively dry so the best time to do a bit of Ha. Here's 2 panels I did around NGC3576. Peter W. posted a beautiful close up of the loops here (http://www.iceinspace.com.au/forum/showpost.php?p=585001&postcount=1) which gave me some incentive to try the area in Ha. I did some RGB previously (http://www.iceinspace.com.au/forum/showpost.php?p=582044&postcount=1)and put the time on it with an ED80 but it's quite faint and hard to extract from the myriad of background stars.
In comparison it was a breeze to get those photons under a full moon with the hyperstar. So it's 1h in 5min subs on each panels. QHY8 with Baader Ha 7nm on C11/Hyperstar 3 combo, guided with PHD/QHY5 in GSO 8x50mm finder.
There's a larger better quality crop without jpg artifacts here (http://www.multiweb.com.au/astro/NGC3576_ha_pano_cf.jpg) [700KB] and finally the full field mosaic is available to view here (http://www.multiweb.com.au/astro/NGC3576_ha_pano_f.jpg)[2.6MB]
Enjoy the shots and thanks for looking :thumbsup:
strongmanmike
30-04-2010, 12:27 PM
Sure a lot of Ha there Marc :eyepop:
Great job
Mike
h0ughy
30-04-2010, 12:35 PM
so are there the same number of stars? Nice one - though you do not have a flat field - looks like you have a small bit of vignetting. Its marvellous how much stuff is up there
multiweb
30-04-2010, 12:50 PM
Thanks Mike. :thumbsup:
Thanks David - I was waiting for you to do a re-count on your RGB before putting numbers on the table :P No vignetting no, it's a mosaic :) My field is like the weather. As good as it gets that day as I'm moving and disassembling the scope every session. Bit of mirror tilt possibly, shifting focus, lazy operator, who knows? :lol: But I'm not that picky. I enjoy the shots for the whole vista not the corners stars.
Bassnut
30-04-2010, 01:49 PM
Looking good Marc, the loops came out well with only 1hr, as they are quite dim.
telecasterguru
30-04-2010, 01:54 PM
Marc,
Really well done, I can't wait for the hyperstar for the 10"RC or ED127 to turn up.
Frank
dugnsuz
30-04-2010, 02:02 PM
Nice work Marc.
You should try a HaRGB blend with your previous data.
Doug
multiweb
30-04-2010, 04:26 PM
Thanks Fred. Yeah and that was under the full moon too... and my d**khead next door neighbourg put his veranda lights on too coz he saw me imaging (he's a bit like that :screwy:). You gotta love narrow band with the hyperstar. :lol:
Thanks Frank. :thumbsup: I don't believe they do one for RCs as you would have to remove the seconday mirror and certainly not for an ED refractor. The Hyperstar is bunch of lenses that replace the secondary mirror in an SCT design so you use only the primary FL which F/2 in most SCTs. That'd be cool to use that on a RC tough if they ever make one... :eyepop:
Thanks Doug. I do have a bit of RGB on it with the ED80 but it doesn't cover all the area. Might play with it though see what comes out of it if I get enough overlap. Good idea. :thumbsup:
Peter Ward
30-04-2010, 05:00 PM
Noise well controlled. Nicely done :thumbsup:
multiweb
30-04-2010, 05:53 PM
Thank you very much. :thumbsup:
troypiggo
30-04-2010, 06:59 PM
Well done mate. Ripper. Really turning out some great images.
seeker372011
30-04-2010, 08:55 PM
once again I like your nice tight stars!
multiweb
30-04-2010, 09:14 PM
Thanks guys - I very much appreciate the comments. :thumbsup:
Hagar
30-04-2010, 09:15 PM
Very nice Marc. The detail is very sharp. Quite comparable to Peters be it a bit smaller.
Well done.
multiweb
30-04-2010, 09:28 PM
Thanks Doug. It's ok on one side of the field. Unfortunately I had to do a meridian flip and the mirror weight shifted so as a result I didn't go as sharp as I wanted on the left portion of the picture. I reckon I might get a rubber mallet to bump the primary so it "sits" in after moving the scope dramatically. That would stop this kind of things which are annoying.
Hagar
30-04-2010, 11:26 PM
I have always tried to only image on one side of the mount to prevent a meridian flip which always seems more trouble than I can be bothered with.
At least with the Ha filter we can image something while the moon is up. Seems like the only time the sky is clear here is when the moon is high or when I am at work. Eventually Iwill win even if I have to rework my roster to get some moonless nights.
Actually I am enjoying the Ha immencely. Still not too sure of full colour NB.
multiweb
01-05-2010, 12:17 AM
I try to avoid meridian flips but sometime you have no choice.
Ha on its own is alright. Sii's hard . Oiii is quite easy and you can do some real nice bi-color pics. So you use L (Ha) R (Ha) G(Oiii) B(Oiii). That will give you very nice red and blue tones. I did that on the Eta shot (http://www.macastro.org.au/home/index.php?option=com_g2bridge&view=gallery&Itemid=123&g2_itemId=3808)I got in the compendium and also here on M16 (http://www.macastro.org.au/home/index.php?option=com_g2bridge&view=gallery&Itemid=123&g2_itemId=3792). Works a treat.
gregbradley
01-05-2010, 09:50 AM
That's a great result. Nicer in widefield.
The Hyperstar has come a long way. When it first came out the results seemed crude. They must have developed it a lot plus the cameras are better now too.
Greg.
multiweb
01-05-2010, 10:48 AM
Thanks Greg. I love the hyperstar. Bit fiddly to fit on and off but I'm getting better at it. Once it's on it so easy. It's "imaging for dummies" (this one anyway) :lol: :thumbsup:
Impressive Marc. What captures the attention is the dark rifts of nebulosity in the scene. Good work, well done.
multiweb
03-05-2010, 08:00 AM
Thanks Jase - glad you liked it. :thumbsup: Yeah I can have a lot more room to play with the data as the hyperstar captures sooo much faint stuff now. All this black clouds popup in my Ha fields now which is pretty cool to process.
Where have you been? Work or playing with new gear?
vBulletin® v3.8.7, Copyright ©2000-2025, vBulletin Solutions, Inc.