leon
06-04-2010, 05:54 PM
Hi guys here is some of the heavy stuff.
I have two G11 Mount Heads ready to br fitted to your peir, or when you are ready to make your peir.
One has the 2 levelling plates still attached, and that is the one that I have been using until now.
The 140mm, x 6mm pipe on top is the exact size of the botton of the G11, and is a very fine fit, there are also 3 holes pre drilled which align with the 3 threads in the actual G11 head.
The aluminium plates cost a fortune and are 20mm thick, nearly $200.00 if I recall.
Now be prepared these things are heavy, so you will have to cover courier shipping, I reckon about $40.00 for the bigger one and maybe 20 or so for the smaller one, however both will fit a g11 perfectly.
The one with the Plates will be $150.00 plus the shipping cost, and the other will be $50.00 plus the shipping cost.
Anyway see what you think.
Leon. :thumbsup:
I have two G11 Mount Heads ready to br fitted to your peir, or when you are ready to make your peir.
One has the 2 levelling plates still attached, and that is the one that I have been using until now.
The 140mm, x 6mm pipe on top is the exact size of the botton of the G11, and is a very fine fit, there are also 3 holes pre drilled which align with the 3 threads in the actual G11 head.
The aluminium plates cost a fortune and are 20mm thick, nearly $200.00 if I recall.
Now be prepared these things are heavy, so you will have to cover courier shipping, I reckon about $40.00 for the bigger one and maybe 20 or so for the smaller one, however both will fit a g11 perfectly.
The one with the Plates will be $150.00 plus the shipping cost, and the other will be $50.00 plus the shipping cost.
Anyway see what you think.
Leon. :thumbsup: