RF test equipments

[miki63au]

G'day everyone,
I have these RF test equipments in my shed.
(I know, need a bigger shed :whistle:)

Any interest for a swap for telescope gears?


Alternatively, I would be interested of a third octave audio analyzer (RTA), or high excursion sub-woofer drivers (not the car sub).

pm if you interested.

Cheers,
Mick.

[Tandum]

miki, 2nd from the bottom on the right, is that a spectum analizer?

[miki63au]

Hi Robin,
no it's a Wiltron 560A SCALAR NETWORK ANALYZER,
under it the TEM TV TRANSPOSER (I think it's 25W)
the Wavetek Sweep Generators are 1MHz-1GHz on the left and
on the top two Advance Q-meter and a rack mount fan.

Cheers,
Mick.

[Gama]

A little more info on the transposer. Like Input Freq, Out freq, L.O's..
Thanks.
Theo

[miki63au]

G'day Theo,
here is what a quick look give me:
The Up-conv. LO is CCIR Ch69 with a crystal freq. of 71.095MHz
the Up-conv. has switchable AGC and
pre correction (I assume Group-Delay.)
The Down-conv. is Aus. Ch2 with a Siemens SAW OFW64950 IF filter.

The linear amp. is in two section each with it's own heat-sink.
The driver amp is a BLW32 /BLW33 Push-Pull followed by a
BLW34 Push-Pull final stage. The amps has a fan cooling.
The psu is linear, and on the back has a 24V DC input.



Cheers,
Mick.

[Gama]

Hi Mick, whats the price tags on the Wavetek unit and the Transposer.

Lastly, dont suppose you have the RF detectors for the Wiltron ?.

Theo

[miki63au]

Hi Theo, you have a pm.

Cheers,
Mick.

[miki63au]

If anyone want to pick up locally, can have all this for a Baader zoom eyepiece or a EQ5 mount.
Open for any other astro swap as well... before I sale it on e-bay.
Any takers?

Mick.