Log in

View Full Version here: : Where can I get a RS232 USB convertor in Perth?


Elliot1628
21-04-2009, 03:32 AM
Hi guys! Long time no see~~:)


I bought a HEQ5 PRO in a Thursday before Easter holiday, which was in BTOW in Perth.


And I knew that I should get a RS 232- USB convertor to connect GOTO with PC, actualy, I cannot find any shop which sale RS232, I got a USB Serial Adapter, which called BEKLIN F5U109, I want to know can it connect GOTO with PC, like RS 232?

If no, I hope friends who from Perth can tell me that in Perth, which shop can I get a RS232 ?:(


Thanks!:)

DeanoNZL
21-04-2009, 05:26 AM
That adaptor should work fine.
Check which "port" it gets assigned in hardware manager (windows)
If you change usb port it is connected to, the "com" port will change as well.

TrevorW
21-04-2009, 11:30 AM
RS232 is a serial adaptor

they come in a 25 pin configuration

or a 9 pin configuration oftern referred too as a DB9

Elliot1628
21-04-2009, 04:24 PM
After asking my Chinese friends, they told me that it doesn't mean that I must choose RS232, I also can choose another adaptor, if it's 9 pins.

For my part, BEKLIN F5U109 is the only one that I found in Perth now, so I will try to use it to connect with my laptop.:)



Thanks!

bird
23-04-2009, 02:01 PM
My guess would be Altronics, Jaycar, Tandy or Dick Smith. One of them should have something.

cheers, Bird

rogerg
23-04-2009, 03:34 PM
If all else fails, search here:

http://www.staticice.com.au

Brilliant site for finding electronics/PC stuff, and comparing prices.

Roger.

Grahame
24-04-2009, 12:39 AM
Gday,
I have one of those belkin USB to serial adapters for use with my EQ6PRO mount and found it to be no good - reason being after about 10-15 mins of inactivity (IE the scope tracking an object) it will time out and you gotta go through resetting the mount and re-aligining again.

I bought another USB to serial adapter from jaycar and hey presto it worked all night just fine! You will also be able to get the nessesary extension cables for it there too :D

something about the belkin adapter is not right for astronomical use so steer clear from this one - it is also the most expensive one out there at about $79.95 i think. Jaycar version is about $39.95 so much better :)

Hope this helps,
Regards,
Grahame.

MrB
24-04-2009, 12:45 AM
Jaycar part # XC4834, approx $40
There are 4 stores in Perth: Northbridge, Midland, Maddington and Rockingham

Shaun
24-04-2009, 12:56 AM
You could try this, not in perth but cheap.
http://www.mwave.com.au/newAU/mwaveAU/productdetail.asp?CartID=mAU@C887C1 V1M4U58B4L5RGD5JD6GNCB2SCQZ9W8Y2KC9 5IGVB&sku=10060057

Robert9
24-04-2009, 09:29 AM
Try Computer Parts Land in Melbourne. http://www.cpl.net.au/ I bought mine for $19 and it works fine with my Nexstar. They advertise them as a USB to serial adapter. If you go to their web-site you will see a section called "Green Guide". This is their advert which gets published each week in the Radio/TV guide with the Melbourne "Age". You will find the adapter listed under "Controller & Acc." in the bottom right hand corner of page 1. There is a choice of either parallel ($27) or serial ($19). Their email address is cplnott@cpl.net.au Tel: 03 8542 8688.

Robert

Shaun
24-04-2009, 09:45 AM
There prices are pretty good, i need a Serial pci card will give them a call.

Elliot1628
24-04-2009, 01:15 PM
Thank you guys!

For summarising your suggestions, I'll go to find real RS232 convertor for a long term and safe use when I am free~~~


Haha~~~:rofl: