usb serial cable with prolific chip.....

[UK1]

where can you buy one of these in the Melbourne area
one guy who has been great helpng me sent me to a store where he got his
and the assistant:screwy: did not have a clue was not my friends fault far from it he got me on the right track with every thing:2thumbs: .....all I got was a homer simson blank look so need help please
Rob

[peter_4059]

What do you want to use the cable for Rob?

[UK1]

It joins the mod on the mount then to the comnputer for tracking

[peter_4059]

Rob,

Are you talking about EQMOD?

There are (at least) two types of USB to Serial cables -

For EQMOD you need USB to Serial TTL. This cable plugs direct into the EQ5 pro/EQ6 mount instead of the Synscan hand controller

This is different to the USB to serial you plug into the bottom of the handcontroller. For that I bought a Keyspan usb-serial adapter and it works well.

If you are looking for USB-Serial TTL try this guy:

http://www.dontronics-shop.com

The part is:

FTDI USB TO SERIAL (TTL LEVEL 5V) CONVERTER CABLE #16493

You will need to change the plug on the end of the cable to suit your mount.

Here is the link to the EQMOD site that explains what you need to do...

http://eq-mod.sourceforge.net/prerequisites.html#interface

Peter

[UK1]

I'll be geeting when it arrives the EQ6 Pro mount
I have the Mod from EQdiect
think It goes where the hand set plugs in so I'v been shown

[peter_4059]

If you are using the shoestring EQDIR adapter you don't need serial TTL - just a USB to serial adapter - keyspan make a good one and there are plenty of belkin ones around also. Heres the Shoestring website - you should be able tyo find the instructions on there

http://www.store.shoestringastronomy.com/products_eq.htm