PDA

View Full Version here: : Is this a mono or colour


Dennis G
28-07-2008, 10:27 PM
:help:I received the DMK 21 Au04 AS FC todays mail and other than the invoice which is marked mono _I clearly ordered mono, there's no such wording on the unit to say it is Mono. Reading the tool bars there's a white balance adjustment I always thought this was for colour. Can some kind member reply and tell me if I have a mono or a colour imager?

Matty P
28-07-2008, 11:10 PM
Hi Dennis,

If you ordered a DMK, you should have a monochrome camera. Have a look on top of the camera and look at the barcode sticker. If it has DMK 21AU04.AS printed on it you have a monochrome camera. DBK and DFK are colour cameras.

When will be first light?

:thumbsup:

iceman
29-07-2008, 05:00 AM
The white balance adjustment may be greyed out?

The mono (like the colour) has gamma, brightness, gain fps etc.

Dennis G
29-07-2008, 10:45 AM
Thanks Matty P and Iceman
Having settled that question I hope IIS will forgive me asking further questions until I get the hang of it.

Just looking at the Tool Bars and checking with the camera on the desk - no scope - there appears to be numerous sections that are not mentioned in your planatery article. Mike. I assume not all sections are used, but leave that for now until I have given it its first light -day light, as you suggested.

iceman
29-07-2008, 11:00 AM
Yes, not all sections are used.

I only touch the gain, and sometimes the gamma, and the framerate.

Always leave it at 640x480, and use Y800 as the codec.