Gluing flocking paper to PVC - looking for suggestions

[Ian Robinson]

Have a couple sheets of black flockng paper - the type that is not self adhesive that I plan to use to flock the tube (a length of 12" PVC storm water pipe).

Any suggestions on a suitable adhesive I might use to glue the flocking paper to the inside of the tube ?

Something that will not be too gooy and wont destroy the PVC would be good.
Anyone know of a spray on adhesive that might do the job ?

[bojan]

Double sticky tape (thin) from Office Works..

[pelu]

There is a glue spray for graphic designers and
Photographers at two levels of bonding force. Spray a layer
every surface, let dry, place a clean paper between the
two surfaces, stick the edge as a reference and then you go
removing the protective paper and pasting. One of the sprays
it is possible to rectify, but the other does not admit mistakes!

[Garyh]

why not try PVA wood glue? Not sure how it bonds to pvc so you would have to test it on a scrap piece of tube and flocking.
The beauty of it is that you can give the inside a coat of it slightly watered down and you should be able to work the flocking around a little to get it nice and smooth and free of wrinkles.
cheers

[Ian Robinson]

I'll give the PVA glue a try with a piece of test PVC tube (got a bit I used a rocket launcher at the beach that I wont miss if if evaporates or turns into a gooy heap.