How To: Creating Cheap Azimuth Circles

[iceman]

Hi all

Denis (mrsnipey) has written a great how-to article describing how to Create Cheap Azimuth Circles.

You can read the article on the IceInSpace Projects and Articles (http://www.iceinspace.com.au/index.php?projects) page, or directly by clicking on the link below:

Creating Cheap Azimuth Circles (http://www.iceinspace.com.au/index.php?id=63,434,0,0,1,0)

Thanks to Denis for writing the article. If you'd like to submit an article or review to IceInSpace, please contact me (http://www.iceinspace.com.au/index.php?contact).

Thanks

[iceman]

article uploaded.

[roblockyer]

Hi Denis
I was searching around for a cheap and easy way to do this project when by serendipity I happened upon your great post. I need to make a circle of ID 614mm and outside roughly 640mm, that's allowing 26mm for the graduation marks. Now using your 1 metre jpeg (if I may with your kind permission:)), how do I dimension down to the above measurements and how do I get the printer to print it out onto a couple of A4 sheets.

Cheers
Rob