Startrek
30-08-2023, 03:07 PM
Decided to process some crappy data I captured 2 weeks ago on M16 Eagle Nebula from Sydney
Bortle 8 Skies
New Moon
Sky Conditions : Average to Poor seeing
Telescope: 8” f5 Klaus Helmerich Carbon fibre Newt
Imaging Camera: ZWO2600MC cooled to -10C , Gain 100
TS Optics GPU coma corrector
Filter: Antlia ALPT 5nm Dualband filter
Guide Scope: Orion 60mm with helical focuser
Guide camera: ZWO120MM-S
92 x 2 min dithered subs
20 x Flats
20 x Bias
EQMOD and Stellarium
APT
PHD2 Multistar guiding ( 0.50 to 0.60 arc sec total )
Subs reviewed in ASTAP
Stacked in Deep Sky Stacker
Post processed in Startools v1.8 Dats set loaded via Compose , used OSC Bicolor luminance , Color option
Initial Autostretch was quite noisy but managed to mitigate the gradients and settle on a reduced dynamic range to clean up the image a bit. Included a default SV Decon and applied Superstructure ( brightness)
Color preset was an SHO preset with saturation and bias adjustments
Only a quick process , didn’t want to spend too much time on it and yes should have adjusted colour and increased saturation a bit …..
Astrobin link for improved resolution…..,
https://www.astrobin.com/033j4c/
Comments welcome
Thanks for looking
Martin
Bortle 8 Skies
New Moon
Sky Conditions : Average to Poor seeing
Telescope: 8” f5 Klaus Helmerich Carbon fibre Newt
Imaging Camera: ZWO2600MC cooled to -10C , Gain 100
TS Optics GPU coma corrector
Filter: Antlia ALPT 5nm Dualband filter
Guide Scope: Orion 60mm with helical focuser
Guide camera: ZWO120MM-S
92 x 2 min dithered subs
20 x Flats
20 x Bias
EQMOD and Stellarium
APT
PHD2 Multistar guiding ( 0.50 to 0.60 arc sec total )
Subs reviewed in ASTAP
Stacked in Deep Sky Stacker
Post processed in Startools v1.8 Dats set loaded via Compose , used OSC Bicolor luminance , Color option
Initial Autostretch was quite noisy but managed to mitigate the gradients and settle on a reduced dynamic range to clean up the image a bit. Included a default SV Decon and applied Superstructure ( brightness)
Color preset was an SHO preset with saturation and bias adjustments
Only a quick process , didn’t want to spend too much time on it and yes should have adjusted colour and increased saturation a bit …..
Astrobin link for improved resolution…..,
https://www.astrobin.com/033j4c/
Comments welcome
Thanks for looking
Martin