EPROM / GAL programmer.. which one?

[bojan]

I am wandering if someone could give me advice for specific (Arduino based ? maybe something else) Eprom programmer..

Right now I need to program one ATF16V8B chip (for XT HDD controller).

There are variety of Arduino designs available for DIY, so I would like to know what is preferred design, if someone knows...


BTW, I have still functional EPROM-EEPROM (with 80c48 adapter) programmer (Elector magazine from '80ies) that I used a lot... probably still works, last time I checked was early '90ies.. 30 y ago!)

Possible issue with this one is limited number of supported devices and (real, not USB mockup) LPT port.
Any ideas? Thanks in advance!

[wasyoungonce]

i use an older TL866 mini pro (ver 1) USB ...perfect....I use an adapter for the SOIC called SOP28 to SOIC1.27 (.300mil)

I program ATF16V8BQL-15SU ...the "BQL" is just lower power consumption at idle or sleep state. So almost in not the same ICs

They are becoming rare! You can buy the TL866 ver 2 from fleabay or here (http://www.autoelectric.cn/en/tl866_main.html). The ver 2 removed some of the special hi voltage EEPROM level programming but so far as i know it'll do these ICs you want. It was a lot cheaper when i purchased it. There is no one programmer to suit them all...sadly.

You need a SOP to DIP adapter mine is a SOP28 to DIP 28 called "OTS-28-1.27-04" specifically for the .300mil SOIC ICs . It opens up and you place the IC in and it clamps back onto the IC legs). Make sure you get the right sized one there are many (more pins like SOP 32 etc is not an issue but ensure you at least get a SOP20! I think they only sell SOP 16/28???. Like this. (https://www.ebay.com.au/itm/284117015534?hash=item4226b19bee:g: ubQAAOSwEwdf2jAV&amdata=enc%3AAQAIAAAAwNFj19WNJHsT4y 6I6cB9epJHL7RHVpoBC9OwkhMRBkpRhZaH3 k9Oc7s8ow%2Fq%2BK9RbIPqqu%2BBnPOU88 CsiH7cDznZBrWy3BZZFXwhh6coUhtmRCGDV PesqoFpIfq6XGzCL45T5YSWvwHZBETJTEDO pPIoD5A9bBVXynukeDTOxqe%2F1nd0paTmC 2JrOV%2FK%2FP6f%2FHi9NJKH900akORxZm EvrVztkVvSrT7aCzFaLrAS1EDV2c8iayhvW 6aQD%2Ff7jGZXaw%3D%3D%7Ctkp%3ABk9SR 7697dG4Yg)...and no i didn't pay anywhere near that price!

If you want i can program an IC for you all you need it the ".jed" file PM me! I'm in Lilydale

[bojan]

Hi Brendan,

Thank you for the advice and the offer :)
If nothing else helps, I will contact you via PM.
Bojan