Didge
09-06-2023, 05:29 PM
3D Printer : FlashForge Creator Pro 2 with IDEX
Purchased new : June 2020
This is a great 3D printer with TWO print heads.
A great IDEX machine for the serious 3D orienting enthusiast
- Print 2 parts at the same time, or print one part using 2 different materials.
- Colour touchscreen for easy navigation and control
- Enclosed printing chamber for better thermal performance
- Metal frame provides superior stability
- Heated build plate lets you work with a variety of materials
Includes :-
- 2 x new (unused) Microswiss XT plated nozzles
- 4 x PTFE Capricorn teflon tubes for hot ends
- 2 x unused bottles of 3D-Lac bed adhesion / anti-warping liquid
- Instructions
- Calibration sheet
- Spare genuine FlashForge self-adhesive blue build plate sheet
- Power cord
Purchased new June 2020 for $1,299
Meticulously maintained - still in as new condition
Runs perfectly - photos show a test build still attached to the build plate.
I’m only selling this printer because I upgraded to a larger machine.
This model currently sells for $1,198 without the extra nozzles etc.
https://www.b3d.com.au/DispProd.asp?CatID=9&SubCatID=119&ProdID=3DPFFcreatPro2
I didn’t keep the original packaging unfortunately, so cannot ship.
Pickup only.
Location : Sydney north.
Selling for $750.
Photos : 3.
Purchased new : June 2020
This is a great 3D printer with TWO print heads.
A great IDEX machine for the serious 3D orienting enthusiast
- Print 2 parts at the same time, or print one part using 2 different materials.
- Colour touchscreen for easy navigation and control
- Enclosed printing chamber for better thermal performance
- Metal frame provides superior stability
- Heated build plate lets you work with a variety of materials
Includes :-
- 2 x new (unused) Microswiss XT plated nozzles
- 4 x PTFE Capricorn teflon tubes for hot ends
- 2 x unused bottles of 3D-Lac bed adhesion / anti-warping liquid
- Instructions
- Calibration sheet
- Spare genuine FlashForge self-adhesive blue build plate sheet
- Power cord
Purchased new June 2020 for $1,299
Meticulously maintained - still in as new condition
Runs perfectly - photos show a test build still attached to the build plate.
I’m only selling this printer because I upgraded to a larger machine.
This model currently sells for $1,198 without the extra nozzles etc.
https://www.b3d.com.au/DispProd.asp?CatID=9&SubCatID=119&ProdID=3DPFFcreatPro2
I didn’t keep the original packaging unfortunately, so cannot ship.
Pickup only.
Location : Sydney north.
Selling for $750.
Photos : 3.