sheeny
10-04-2023, 11:18 AM
Engineered pier suitable for EQ6 or smaller mounts.
Fabricated from 100 SHS. DOES NOT include top plate. I've sold that separately.
Pier height is 900 overall fixed flanges. Suits M12 levelling bolts for the top plate.
Also as seen in the photos is an independent aluminium stand for the scope handpiece and eyepieces (reduce risk of disturbing the scope). This can be included for free if you want it (otherwise I'll probably recycle it;)).
Baseplate holes to suit M12 hold down bolts.
Recommend the base be properly grouted/mortared when installed. I can advise on how to do either method.
$50 pickup only in Oberon NSW.
Al.
Fabricated from 100 SHS. DOES NOT include top plate. I've sold that separately.
Pier height is 900 overall fixed flanges. Suits M12 levelling bolts for the top plate.
Also as seen in the photos is an independent aluminium stand for the scope handpiece and eyepieces (reduce risk of disturbing the scope). This can be included for free if you want it (otherwise I'll probably recycle it;)).
Baseplate holes to suit M12 hold down bolts.
Recommend the base be properly grouted/mortared when installed. I can advise on how to do either method.
$50 pickup only in Oberon NSW.
Al.