RJ24 to 9 pin connection diagram

[Merlin66]

Help!
My NEQ6pro has been connected to an EQMod setup for so long I've lost the original handcontroller to Mount cable.


This was a RJ24 (at the Synscan) and a 9pin male at the mount.
The RJ24 is just a Cat5/6 cable but I don't know the connection/ wiring diagram for the 9pin connection side.
Can anyone help????
(I'm hoping a Cat 5/6 to 9pin serial adaptor like this may work:)
Appreciate any help I can get...........

[Merlin66]

OK found a link which seems to show the wiring.
https://www.cloudynights.com/topic/730066-help-with-eq6-hand-controller-cable/
need to find a 9pin male plug and my soldering iron - I know it's in a box somewhere.....we only have about twenty left to unpack (well maybe more:rolleyes: )

[Merlin66]

Hmmm, the colours of my CAT5 cable do not match the colours shown in the previous reference.
I can only assume over the years the standard has changed.
https://sites.psu.edu/wsithelp/2017/07/20/cat5-network-cable-wiring-diagram/


(I now find we have T-268A v's T-268B wiring colours!!
https://www.startech.com/en-au/faq/network-cables-a-vs-b-pinout )