EAF on SW 300P Help.

[Astroman]

Hi all,

Is there some non-destructive way of attaching the EAF to this focuser on my new Skywatcher 300P f4 newtonian? I maybe thought of using the two holes next to the centre knob but not sure, so I thought I would throw out the question. Pics included for reference.

Andrew

[gbeal]

What purpose does the big shiny knob serve? Friction? If so, remove it, and use that thread, it's what I tend to do (albeit, not on a SW scope, but.....).

EDIT: I think also you could use two of the four attachment screws/bolts. Take one out, see what thread they are (possibly M4?) and get the required length to fit. Again something I have done.

[pmrid]

I used this method. It’s a DIY job and needs a hose clamp and a bit of aluminium. I’ll attach a photo so you can get the idea. You remove the coarse focus knob. Let me know if you need more images. The scope is a GSO 8 inch newt with a standard Bintel 10:1 Crayford focuser.

[Astroman]

Thanks for the reply,

Yeah I think it is for friction. I was thinking of using that and two of the other bolts, but wanted to know if anyone HAD actually done it.

[RyanJones]

I’m pretty sure ZWO sell an adaptor for that particular focuser that uses the 4 small black screws to mount the EAF

[Astroman]

I was actually looking for this but couldn't find it. I will most likely just get bigger bolts to go into the existing place of the original outer 4 bolts. It looks like it will line up with the EAF bracket.