PDA

View Full Version here: : [SOLD] APOGEE ALTA U8300 CCD - KODAK Sensor.


MortonBay
19-02-2022, 06:35 PM
FOR SALE is my APOGEE ALTA MONO High Performance CCD Camera

Bought this 3 years ago from an IIS member but have not used it at all, too many other cameras, too many cloudy nights and not enough time to do MONO.

As it is an iconic mono camera it deserves a new home.

The Alta U8300 medium format 8 megapixel Kodak Blue Plus sensor, ideal for applications requiring a large field of view with a smaller pixel.

CCD Specifications
• 3326 x 2504 array, 5.4 micron pixel
• 5 MHz 12-bit and 1 MHz 16 bit digitisation
• 32 Mbyte camera memory
• USB 2 interface, no plug in cards or external controllers
• Programmable, intelligent cooling to 50-55 degrees C below ambient
• Binning up to 8 Horizontal x 2504 Vertical
• Anti-Blooming to 1000X saturation
• Subarray readout and fast sequencing mode
• Programmable fan speed for low vibration
• Two serial port outputs for control of peripheral devices
• Runs from a single 12 volt supply

Specification
- CCD Kodak KAF-8300
- Array Size (pixels) (3326 x 2504)
- Pixel Size (5.4 x 5.4 microns)
- Imaging Area (18 x 13.5 mm) (243 mm2)
- Imaging Diagonal (22.5 mm)
- Video Imager Size (1.4”)
- Linear Full Well (typical) (25.5K electrons)
- Dynamic Range (64.4 db)
- QE at 400 mm (30%)
- Peak QE (580, 660 mm) 60%
- Anti-blooming 1000X

Asking price is $950 posted

Please PM if interested

MortonBay
16-04-2022, 09:54 PM
Price reduced to $900 shipped

gazzabott
17-04-2022, 09:19 PM
Hi, are the pins etc in good condition. Are any cables included? What filter wheel have you used, what wheel was in the photo.

gazzabott
17-04-2022, 09:21 PM
What sort of use (hrs approx) had the camera been used in?

gazzabott
17-04-2022, 09:27 PM
One further question, what is the size of the thread, your spec page is not very good to read