peter_4059
24-10-2021, 01:07 PM
$$$$ Price Reduced $$$$
I've got a HAFCO AL320G metal lathe that needs a new home. It is about 10 years old however has only had very light use - mainly making aluminium threaded camera adapters for my various imaging trains over the years. It comes complete with the HAFCO stand and tooling (some of which is BNIB).
Included with the lathe:
Dead centre x2
Face plate
Fixed steadies x2
4 jaw chuck
Change Gears
Spanners
Reverse jaws
Instruction manual
Splash guard and swarf tray
Light
Stand
Tooling:
12mm Threading kit L456
12mm Lathe tool lit L450
MT Carbide live centre
MT3 Bull nose Centre BC106
Parting off block 12mm L074
Knurling tool L080
13mm Drill chuck C289
MT3 Drill chuck arbor D443
Diamond Tool holder
Replacement cost of this today is between $4600-5000. I'm looking for $2400 for the lot. Buyer picks up (Brisbane).
The lathe is quite heavy ~280kg - I lifted it from a trailer onto the stand using a hired engine hoist.
I've got pictures of all the gear - here is a sample.
PM me if you are interested.
I've got a HAFCO AL320G metal lathe that needs a new home. It is about 10 years old however has only had very light use - mainly making aluminium threaded camera adapters for my various imaging trains over the years. It comes complete with the HAFCO stand and tooling (some of which is BNIB).
Included with the lathe:
Dead centre x2
Face plate
Fixed steadies x2
4 jaw chuck
Change Gears
Spanners
Reverse jaws
Instruction manual
Splash guard and swarf tray
Light
Stand
Tooling:
12mm Threading kit L456
12mm Lathe tool lit L450
MT Carbide live centre
MT3 Bull nose Centre BC106
Parting off block 12mm L074
Knurling tool L080
13mm Drill chuck C289
MT3 Drill chuck arbor D443
Diamond Tool holder
Replacement cost of this today is between $4600-5000. I'm looking for $2400 for the lot. Buyer picks up (Brisbane).
The lathe is quite heavy ~280kg - I lifted it from a trailer onto the stand using a hired engine hoist.
I've got pictures of all the gear - here is a sample.
PM me if you are interested.