View Full Version here: : QHY9cfw
I.C.D
04-03-2021, 04:23 PM
Hi has anyone got a copy of a Qhy9cfw disk that I can borrow
Ian
Hi ya. CFW original, CFW2 or CFW3?
If it is drivers, they will be on the manufacturers website.
If you are trying to run it without connecting it to a QHY camera, there might be a jumper you need to change on the circuit board.
I.C.D
05-03-2021, 08:28 PM
Hi i the wheel is the original cfw ,i have got the filter to work but i have to calibrate it and what i have been reading is that i need a copy of the install disk to calibrate it ?????
ian
Alchemy
06-03-2021, 12:25 AM
Didn’t know that, mine just worked out of the box, but I should have the disk that came with it somewhere.....
will have a look around ( it’s not a generic company one, Theo sent it out with it)
When I upgraded to windows 10 I just used the drivers from the website, as I presume they were 64, the original are probably 32
Alchemy
06-03-2021, 08:08 AM
Found it
Pm sent
Alchemy
06-03-2021, 10:38 AM
Re calibration of filter wheel
This sets the start stop positions of the wheel, if you set for go to of filters 1-5 of the wheel and the filters are pretty much in the middle there’s no need to calibrate, it looks like if it won’t centre then that’s where you need to calibrate it.
Is this the case
I.C.D
06-03-2021, 04:40 PM
hi Clive not following your reply ,do you have a disk I can borrow
Ian
Alchemy
06-03-2021, 04:48 PM
I can send you all the files.
Going to need somewhere to send it to..... that’s why I sent my ph number in a pm
If you don’t want to talk just send a txt
I.C.D
07-03-2021, 06:07 PM
I Clive I have sent you a private message, I didn't get
your message did you get mind.
Ian
Alchemy
07-03-2021, 06:15 PM
Looks like messaging isn’t working properly
Not sure how we can communicate ?
Alchemy
07-03-2021, 06:19 PM
Gone into trying to send you an email through control panel area
Alchemy
07-03-2021, 06:20 PM
I’m just going to put all the files on a stick and send it in the mail, you can keep it all, no need to return anything
I.C.D
07-03-2021, 07:27 PM
Hi Clive mp04129980317 ringme
Alchemy
09-03-2021, 04:50 PM
Software sent in the mail
Tracking
TMP40 08300 40700 14663 02092
Hope you know how to configure a COM port for the program, there’s a read me and such with it
I.C.D
10-03-2021, 02:31 PM
Thanks mate waiting for your letter to arrive
Ian
vBulletin® v3.8.7, Copyright ©2000-2025, vBulletin Solutions, Inc.