FlashDrive
28-02-2021, 02:52 PM
The 2 x speed focuser on my WO Scope was not the best in operation.
So....I decided to investigate and disassembled it.
I found the ' brass ' bearing holder shaft was crossed threaded at the top and the ' tiny bearings ' were dry and ' pitted ' .
No wonder it ' felt ' like a gravel pit when first using it.
Apparently these were not the best of the early WO Focuser ( reports on CN about them ) ....either very poor QC / or ....it was ' fiddled ' with ( cross thread on shaft ) at some stage of it's life.
I have removed it ( the whole lot ) and replaced it with a better focuser pinion shaft ( only single speed now ) ...but is 1,000 % smoother and much nicer in operation.
I'm a fussy person, but I like things to be ' right ' ... even if it means spending money to fix it...although this time it was fixed with ' spare parts ' from my Astro' Bits and Pieces, I ' never ' throw things away, because sometime down the road ( as in this case )...it all came together nicely.
Col...:)
So....I decided to investigate and disassembled it.
I found the ' brass ' bearing holder shaft was crossed threaded at the top and the ' tiny bearings ' were dry and ' pitted ' .
No wonder it ' felt ' like a gravel pit when first using it.
Apparently these were not the best of the early WO Focuser ( reports on CN about them ) ....either very poor QC / or ....it was ' fiddled ' with ( cross thread on shaft ) at some stage of it's life.
I have removed it ( the whole lot ) and replaced it with a better focuser pinion shaft ( only single speed now ) ...but is 1,000 % smoother and much nicer in operation.
I'm a fussy person, but I like things to be ' right ' ... even if it means spending money to fix it...although this time it was fixed with ' spare parts ' from my Astro' Bits and Pieces, I ' never ' throw things away, because sometime down the road ( as in this case )...it all came together nicely.
Col...:)