3D-print, a temperature sensor holder

[Astrofriend]

That's the small thing that makes it. Today I made a holder to the temperature probe I use to my motor focuser. I didn't attach it direct to the lens but to the dovetail. Normally I stripe small devices in place, but why not make a 3D-printed holder ?

Find here how it looks:
http://www.astrofriend.eu/3d-printing/temperature-sensor-holder/01-temperature-sensor-holder.html

I have uploaded the STL file if someone find it interesting to 3D-print it.

All my STL files on the 3D-prining main menu:
http://www.astrofriend.eu/3d-printing/3dprinting.html

Note: my STL files can maybe have errors, but they work on my AnyCube delta printer with the Cura slicer.

/Lars

[RyanJones]

In my opinion nothing looks worse that parts just stick taped everywhere. Making a dedicated bracket is on my to-do list too. Nice work !

[Astrofriend]

Yes, make our telescopes good looking !

Lars

[Astrofriend]

Today I made another small device, a cover for the viewfinder on the camera. My smallest 3D-printed objekt yet.

http://www.astrofriend.eu/3d-printing/viewfinder-cover/01-viewfinder-cover.html

This was the prototype, next one will be in black material.

/Last