HenryNZ
08-12-2019, 08:48 AM
Price drop, and I have combined some items into bundles
I am doing a clean out of accessories that I have not used for a while. All items in good used condition unless otherwise specified. All prices in AUD$. I am from New Zealand so will need to consider shipping, which buyer will have to pay. Most things can be sent to Aus from NZ using small parcel air mail (AUD$16) which is insured with no tracking, or International courier (AUD$36) which is insured, tracked and requires signature on delivery. For the really small items like the filters I may be able to put them in envelopes and send them for even less. I will confirm amount before you pay. I prefer Paypal from Australian buyers but please add 4% to total. For NZ buyer bank transfer of the NZ$ equivalent is fine.
Please note I have some of these items listed in the local NZ auction site as well (Trademe). NZ buyers may want to check out the listings there.
(1) IDAS LPS-P2 48mm light pollution filter
AUD$145
(2) IDAS LPS-D1 clip on filter for Canon APS-C
AUD$145
(3) TS-Optics M60 to 2" eyepiece adaptor with two thumbscrews and TS-Optics M60 extension tubes 7mm, 14mm, 28mm. Difficult to find items for special adaptation of some Tak/Vixen focuser. I used to use it for my Tak-e130D.
AUD$20 for the lot
(4) Orion Thin OAG + Baader 1.25" helical eyepiece focuser (so that the guide cam focus can be adjusted)
AUD$200
(5) ADM Vixen Saddle 6" long, with 4 bolt holes + (Fair condition) Farpoint D-style clamp 6 cm long
AUD$80
(6) ADM Rings 80 mm internal diameter - 1 pair + ADM Ring 4" internal diameter - single ring only (I used the former to hold a 50 mm guide scope. I used the latter to hold the front of Samyang 135mm lens)
AUD$90 for the lot
(7) ADM Radius block - 1 pair (I can't remember size but pretty sure it is for 6"RC which is where I took them off from)
AUD$30
SOLD:
TS-Optics filter drawer system (filter box and 4 drawers) for 1.25" filters
TS-Optics T2 tilt adjuster
TS-Optics M48 tilt adjuster
I am doing a clean out of accessories that I have not used for a while. All items in good used condition unless otherwise specified. All prices in AUD$. I am from New Zealand so will need to consider shipping, which buyer will have to pay. Most things can be sent to Aus from NZ using small parcel air mail (AUD$16) which is insured with no tracking, or International courier (AUD$36) which is insured, tracked and requires signature on delivery. For the really small items like the filters I may be able to put them in envelopes and send them for even less. I will confirm amount before you pay. I prefer Paypal from Australian buyers but please add 4% to total. For NZ buyer bank transfer of the NZ$ equivalent is fine.
Please note I have some of these items listed in the local NZ auction site as well (Trademe). NZ buyers may want to check out the listings there.
(1) IDAS LPS-P2 48mm light pollution filter
AUD$145
(2) IDAS LPS-D1 clip on filter for Canon APS-C
AUD$145
(3) TS-Optics M60 to 2" eyepiece adaptor with two thumbscrews and TS-Optics M60 extension tubes 7mm, 14mm, 28mm. Difficult to find items for special adaptation of some Tak/Vixen focuser. I used to use it for my Tak-e130D.
AUD$20 for the lot
(4) Orion Thin OAG + Baader 1.25" helical eyepiece focuser (so that the guide cam focus can be adjusted)
AUD$200
(5) ADM Vixen Saddle 6" long, with 4 bolt holes + (Fair condition) Farpoint D-style clamp 6 cm long
AUD$80
(6) ADM Rings 80 mm internal diameter - 1 pair + ADM Ring 4" internal diameter - single ring only (I used the former to hold a 50 mm guide scope. I used the latter to hold the front of Samyang 135mm lens)
AUD$90 for the lot
(7) ADM Radius block - 1 pair (I can't remember size but pretty sure it is for 6"RC which is where I took them off from)
AUD$30
SOLD:
TS-Optics filter drawer system (filter box and 4 drawers) for 1.25" filters
TS-Optics T2 tilt adjuster
TS-Optics M48 tilt adjuster